Flametect CWD - Clear Flame Retardant Spray for Wood - 750ml - Non Toxic - [FPS-FCWD750]

A Unique product For Interior & Exterior use on Cladding, Decking, Partitions, Log Cabins & Sheds. A Clear Flame Retardant Impregnation Treatment for "Absorbent" Wood & Timber Products.

Flametect C-WD+ can be over-coated with Specific Clear & Coloured Osmo Coatings.  

• Tested & Certified to BS EN927-6 Accelerated Weathering Test. (NT053 & NT054)
• EN16755 DRF EXT for permanent use in exterior applications.
• Tested to BS476 Class 0 & 1
• Tested to Euroclass EN13501 Class B-s:2 d:0 
• Tested in the USA to ASTM74/UL723/NFPA255

Flametect CWD+ is a Clear, Colourless and Odourless Impregnation, it will not discolour, hard or soft woods or other wood derived materials. It does not leave a visible sheen and dries to a natural finish. Flametect CWD+. Contains environmentally friendly components that assists the active flame retardant components to deeply penetrate the wood.

Our products are desig?ned to be easily applied using basic DIY skills or we can help source professional contract spraying teams for the larger projects.

Unlike our competitors products we have full test reports to  BS476 Class 0, Class 1 & Euroclass B. BS476 Class 0 is not interchangeable with the Euro Classifications. 

Flametect CWD+. the insoluble formulation "locks in" the flame retardant components together  with couplers that protect the flame retardant from harsh environments leaving a weather resistant colourless impregnation once applied & dry.   

• Manufactured and developed in the UK. 
• Statement of performance with every order View Example
• Produced in an ISO 9001 Quality Assured environment to exacting standards
• Durable Outdoors. Does not Leach or degrade. 
• Treatment rate 4 sq. metres per litre  (250ml per square metre)
• Lowest Finished Cost per square mtr.
• Non-Hygroscopic / humidity resistant chemistry
• Non-Corrosive to fixings
• Does not affect breathability or physical properties of the wood. 
• For Interior and Exterior Use. 
• Water based flame retardant. No nasty solvents.
• Non-toxic, non-irritant                                          
• Excellent performance on dried grasses & palm leaves
• Suitable for spray, roller brush or immersion application.
• Achieves B.S. 476 classes 1 & 0, B.S./EN 13823 Type B & ASTM E-84/UL723/ NFPA255
• Limitations: Does not achieve BS476 part 21 or 22 (30 or 60 minute resistance.) Does not upgrade standard doors to fire doors. 
• Can perform to M.C.A. & I.M.O specifications for charter vessels & passenger ships

??????

Application Instructions (Wood & Wood Based Products)

• Flametect C-WD+. may be applied to wood by immersion, spray, brush or roller
• Apply 250ml Per Square metre. 
• It is important that the desired volume is applied to the wood
• Ensure wood is dry before application, moisture content should be below 20%.
• The desired absorption rate for most woods & MDF is 4 square metres per litre
• Where multiple applications are required please allow approximately 1 hour between treatments.
• When applied externally protect from the elements allow to dry for 24 -48 hours
• Do not store below 10 Centigrade
• Use within 90 days of purchase 

Typical Applications

• Apply to Natural & Artificial Christmas Trees, Decorations & Costume. 
• Curtains & drapes, including theatre stage & wing curtains (Inc. Synthetic Materials)
• Stage props, flat sets & scenery
• Chairs settees, stools, fixed upholstery & some bedding. 
• Theatrical costumes & party clothing
• Boat beds, bunks & curtains
• Aircraft seating & carpets
• Artwork, Paper and Card
• Artificial Grass (Astroturf) See test report 
• Papier mache projects & collages
• Lighting special effects for theatre & stores
• Tapestries & wall hangings
• Banners & signs for internal use
• Rugs & Carpets (Including Synthetic Carpets)
• Temporary fireproof barriers
• Retail Displays
• Wall Paper and Coverings (Test Report)
• Hay & straw internal scenery for seating
• Foams & Sponges
• Artificial & dried natural flowers & foliage